Staff Bio's

B. Lynn Ferguson, PhD


Expertise: Metallurgy and Materials Technology
Thermal and Deformation Process Modeling
Powder Metal Consolidation Processes
Finite Element Analysis
Product and Process Design

Lynn Ferguson, founder and President, is a graduate of Drexel University where he earned a B.S. in Metallurgical Engineering and M.S. and Ph.D. in Materials Engineering. Previously he was employed at TRW, Inc. (1978-1982) and Republic Steel Corporation (1975-1978). His career has focused on the broad field of mechanical metallurgy, with emphasis on thermal and deformation processing effects on metals.

Over the past two decade he has been extensively involved in simulation of mechanical and thermal processes using computer-based tools such as the finite element analysis. Example applications include analysis of forging, extrusion and rolling processes; modeling of cold and hot powder metal consolidation processes; and heat treatment of ferrous and nonferrous alloys to investigate phase transformations, distortion, and residual stress.

Lynn has been active in his profession, being a working member of Cleveland Chapter of ASMI, active on national ASMI committees, an editorial review committee member for International Journal of Powder Metallurgy, and many times a participant in local and national educational seminars and short courses. He has authored or co-authored more than 70 technical papers and 1 book. He is a Fellow of ASMI, and recently was elected a Fellow of the materials engineering honorary society Alpha Sigma Mu, and a Fellow in the International Federation for Heat Treatment and Surface Engineering (IFHTSE).

On the personal side, he was married St. Patrick's Day 1973 to Ethnea, and he has two grown children, Erin (grandson Oskar) and Blake (Kristen).  He and his wife enjoy weekend walks year-round in Cleveland's great MetroPark system.


Zhichao (Charlie) Li, PhD, MBA 


Expertise: Computer Aided Process Design
Process Model Data Fitting Using Optimization Methods
Nonlinear Finite Element Analysis
Heat Treatment Process Troubleshooting
Engineering Software Development

 

Dr. Zhichao (Charlie) Li is a graduate of the Harbin Institute of Technology in Harbin, China, where he earned both Bachelor and Master Degrees in Metalforming, and Wright State University, where he earned a Ph.D. in Mechanical Engineering. At Harbin, Charlie worked on various metalforming processes, including drawing and extrusion. At Wright State, Charlie studied under Professor Ramana Grandhi and worked on forging process design software, heat treat process simulation models, and methods for optimizing heat transfer coefficients for quenching processes.  Charlie also earned his MBA degree from Baldwin Wallace University.

At DANTE Solutions, Charlie is in charge of software development, enhancement, and support. He has developed software to determine steel phase transformation kinetics parameters for both heating and cooling from dilatometry data. These parameters are used by the phase transformation kinetics calculations embedded in the DANTE heat treat simulation software. He has also developed a utility program for determining heat transfer coefficients from thermocouple data for instrumented parts during heat treatment. Other software work includes development of a vacuum carburization module.

Charlie is married and has a son Eddie and daughter Sophia. He and his wife Jing keep close tabs on events in his homeland of China via satellite TV, and they enjoy the many programs that they receive.

 


 

Justin Sims

 

Expertise:  Mechanical Engineering

Finite Element Analysis

Modeling of Heat Treatment Processes

 

Justin Sims is a graduate Mechanical Engineer from Cleveland State University.  After interning at DANTE Solutions for several years, he joined as a full time employee in June, 2016.  His project work includes development and execution of carburization and quench hardening simulations of steel components, analysis of heat treat racks and fixtures, and upgrading the company computers.  He also serves as a primary trainer for companies that use the ANSYS version of DANTE.

In his spare time, Justin enjoys biking, camping, and attending concerts.

 


 

Tianyu Yu

Expertise:  Finite Element Analysis

Metal Manufacturing Mechanics

Engineering Software Development

Modeling of Heat Treatment Processes

Dr. Tianyu Yu earned his Ph.D. in Engineering Mechanics, Aerospace Engineering from Iowa State University (2016). He has a Bachelor Degree of Mechanical Engineering from Harbin Institute of Technology (2011), Harbin, China. After finishing an internship at Novelis, Inc. in Atlanta where he worked on metal forming, Tianyu joined DANTE Solutions in January, 2017, where he is working on FEA modeling and Software Development.

Tianyu has broad interests in Metal Manufacturing modeling, fracture & fatigue, High Precision Manufacturing. Tianyu has published his thesis research in highly regarded journals such as Int. J. of Machine Tools and Manufacture, Wear, and Int. J. of Advanced Manufacturing Tech.

In his spare time, Tianyu enjoys playing card games and watching sports.